You have 0 items in your cart.
Products
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
Fluke TP82 Insulation Piercing Clip Set | Banana jack accepts all DMM and banana jack leads Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead For use with test leads with 2 mm probes Tested to 60 V DC | Automotive Accessories |
|
|
|
Fluke TP88 Rigid Back Probe Pins | Slides onto test probes measuring 2 mm (0.08 inches) Tested to 60 V DC | Automotive Accessories |
|
|
|
Fluke BP120MH Rechargeable Ni-Cad Battery Pack | Nominal Voltage: 4.8V Capacity: 1800 mAh | Batteries, Charges and Adapters |
|
|
|
Fluke BP189 High Capacity Battery Pack for Fluke 180 Series DMM | Attach this battery pack to your Fluke 189 to use 4 ‘C’ cell batteries instead of the ‘AA’ cell batteries CAT III 1000 V, CAT IV 600 V One Year Warranty Batteries and meter sold separately | Batteries, Charges and Adapters |
|
|
|
Fluke BP190 Ni-MH Battery Pack | Nominal Voltage: 7.2V Capacity: 3,500 mAh | Batteries, Charges and Adapters |
|
|
|
Fluke BP7235 Ni-MH Battery Pack | 7.2V 3500 mA-hour rechargeable Ni-MH battery pack Provides typical 16-hour battery life when used in 700 or 740 Calibrator Material: Six 1.2V dc Ni-MH cells in custom-molded ABS/PC-blend case Dimensions: 7.1" x 2.2" x .9" (150 mm x 56 mm x 22 mm) Weight: 11 oz/310g One year warranty | Batteries, Charges and Adapters |
|
|
|
Fluke TISBP IR Smart Battery Pack | Rechargeable Battery for the Ti40/50 Series Thermal Imagers Replacement battery pack for FlexCam - single battery pack for additional time in the field or replacement | Batteries, Charges and Adapters |
|
|
|
Fluke BC190 Line Voltage Adapter/Battery Charger | Mains (Line Voltage) - BC190/801 (Europe) 230V ± 10% - BC190/803 (North America) 120V ± 10% - BC190/804 (United Kingdom) 230V ± 10% - BC190/806 (Japan) 100V ± 10% - BC190/807 (Australia) 230V ± 10% - BC190/808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 are equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. (Line cord not included) | Batteries, Charges and Adapters |
|
|
|
Fluke BC190 Line Voltage Adapter/Battery Charger | Mains (Line Voltage) - BC190/801 (Europe) 230V ± 10% - BC190/803 (North America) 120V ± 10% - BC190/804 (United Kingdom) 230V ± 10% - BC190/806 (Japan) 100V ± 10% - BC190/807 (Australia) 230V ± 10% - BC190/808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 are equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. (Line cord not included) | Batteries, Charges and Adapters |
|
|
|
Fluke BE9005 Battery Eliminator | 7.5V dc battery eliminator for operation of calibrator from 120 volt AC line UL/CSA recognized For use in North America; 120V ac 60 Hz lines 3.8" x 2.5" x 2.2" (96 mm x 63 mm x 56 mm); 72" (1.8m) cord Weight: 1 lb/0.5 kg One year warranty | Batteries, Charges and Adapters |
|
|
|
Fluke PM8907 Line Voltage Adapter/Battery Charger | Mains (Line Voltage) - 801 (Europe) 230V ± 10% - 803 (North America) 120V ± 10% - 804 (United Kingdom) 230V ± 10% - 806 (Japan) 100V ± 10% - 807 (Australia) 240V ± 10% - 808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 is equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. Line cord not included A North American line plug adapter is included | Batteries, Charges and Adapters |
|
|
|
Fluke PM8907 Line Voltage Adapter/Battery Charger | Mains (Line Voltage) - 801 (Europe) 230V ± 10% - 803 (North America) 120V ± 10% - 804 (United Kingdom) 230V ± 10% - 806 (Japan) 100V ± 10% - 807 (Australia) 240V ± 10% - 808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 is equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. Line cord not included A North American line plug adapter is included | Batteries, Charges and Adapters |
|
|
|
Fluke TI-CAR Charger | For the ultimate flexibility in the field - recharge your thermal imager wherever and whenever you need to For use with: Ti32, Ti25, Ti10, TiR32, TiR1, TiR | Batteries, Charges and Adapters |
|
|
|
Fluke PM9080 Optically Isolated RS-232 Adapter | Safety designed serial interface for digital hard-copy output to serial printer or remote control and data exchange with a PC. Compatible with all Fluke ScopeMeter® test tools, with Power Quality Analyzers, Graphical MultiMeters and MultiFunction Counters. Hard Copy: ScopeMeter test tools support Epson FX/LQ Series, LaserJet and DeskJet compatible printers Remote control: Waveforms, Scope and Meter measurements, Front Set-ups and performance verification/calibration Transfer rate:... | Batteries, Charges and Adapters |
|
|
|
Fluke SV225 Stray Voltage Adapter | Stray voltage can appear in electrical installations, due to the capacity between wires This may result in erroneous readings on high impedance meters The SV225 solves this without compromising safety On energized wires, the meter will indicate the real voltage On non-energized circuits the meter will read close to zero (even if there are stray voltages) It can be used with all modern meters with standard input spacing. Rated CAT III 1000V, CAT IV 600 V | Batteries, Charges and Adapters |
|
|
|
Fluke 884X-ETH Ethernet Interface Cable | 8-conductor (4 twisted pair) unshielded cable (48 inches) with an 8-position modular plug (RJ45) on each end, with an overmold boot/strain relief Rated working voltage: 100 V rms maximum Operating temperature range: -40 ºC to +80 ºC | Cables & Hardware |
|
|
|
Fluke OC4USB USB Interface Cable | Supports the Fluke 120 Series, Fluke 190 Series ScopeMeters, as well as the 43 and 43B and 430 Series Power Quality analyzers Supports Windows Vista/ XP/2000/Me/98 SE Cable length 1.5 m (4.9 ft) | Cables & Hardware |
|
|
|
Fluke PM9080 Optically Isolated RS-232 Adapter | Safety designed serial interface for digital hard-copy output to serial printer or remote control and data exchange with a PC. Compatible with all Fluke ScopeMeter® test tools, with Power Quality Analyzers, Graphical MultiMeters and MultiFunction Counters. Hard Copy: ScopeMeter test tools support Epson FX/LQ Series, LaserJet and DeskJet compatible printers Remote control: Waveforms, Scope and Meter measurements, Front Set-ups and performance verification/calibration Transfer rate:... | Cables & Hardware |
|
|
|
Fluke PM9092/001 50 Ohm Coaxial BNC cable set (3 x 0.5m) | 50 Ohm Coaxial BNC cable set, 3 x 0.5 m. Three colored BNC male connectors (red, gray, and black) for easy identification. | Cables & Hardware |
|
|
|
Fluke C115 Soft Carrying Case | Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60 Series IR thermometer and a pouch for test leads and other accessories. Durable polyester 600D case construction for long life. Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools. One-year warranty. | Cases and Holsters |
|